This DIY chicken feeder, making life easier on the homestead…
Trying to maintain a homestead, even on a small scale, can be difficult to balance when you throw working full time in the mix. As our journey has progressed and chores are divided, we try to make things as easiest as possible for us. As badly as we would love to tend to our homestead full time, we both wake up every morning and go to work. So, in order for things to work, you know things like…..
keeping the house clean, kids fed and bathed, dinner, lunches, tending to the garden, the chickens, kefir, kombucha, composting…….
We have to get tricky with how we accomplish all these things while still having energy for us. Believe me, it is not always easy and it doesn’t always flow so effortlessly.
But hey we try!
When it comes to things like gardening or feeding the chickens, we try and find ways to keep things as easy flowing and as non-laborious as possible.
Feeding your chickens may not seem all that bad but when you have a full plate, removing one chore can seem like a life saver. This is why we came up with our new chicken feeder, and by we I mean my husband. This badass feeder holds half a bag of feed.
Oh yea, you heard that right!
It doesn’t require anything other than removing the lid in the morning so the ladies can eat as they please and simply closing it up at night so the rats CANNOT! No more filling small feed buckets every other day. All you do is fill it once and depending on how many chickens you have, you don’t really need to bother with it for a few weeks.
Have I grabbed your attention?
Let’s do this thang then!
Do you want to start a homestead?
Download our eBook and learn 15 easy skills that will get you 15 steps closer to your dream of homesteading.
Download Your eBook
DIY chicken feeder
Whatcha wanna get is:
6 inch PVC pipe (main body of feeder)
45 degree 6 inch Y connector
6 inch PVC cap (you’ll need 3 caps)
2 drawer handle knobs
Whatcha wanna do is:
- The size of your feeder really depends on how much food you want your feeder to hold. Ours is measured 4 feet high with a 6 inch diameter PVC pipe. You want to cut your main body the proper height that fits your coop. Make sure when purchasing your main body PVC pipe, that you purchase more than your are measuring for your coop. You will need to make additional cuts later.
- Once you have your height cut, set that aside. From the left over pipe (remember I told you to buy more than the size you were measuring for your coop) cut three 3 inch pieces. Set these aside.
- Drill a hold in two of your caps and screw in your knobs. Set aside.
- Now it is time to assemble these piece together. Super easy ready?
- Take your Y connector and at the bottom spread some PVC primer and glue on the inside of the connector, now take one of the three 3 inch pieces you cut and place inside be sure to leave about 2 inches exposed. This will allow you to connect the cap. Spread some primer and glue on the outside of the 2 inches of exposed PVC and glue the cap on. Make sure that the cap sit snug. This will hold all the food in the pipe.
- Now, move to the opening hole where the feed will be available for your chickens, take another 3 inch piece and do the same thing. Primer and glue it in the hole but be sure to leave about 2 inches exposed. This is where you will place a cap with a knob. Do not glue this cap on. This is the cap that you will take off so your chickens can eat during the day and put on at night so no other critters can munch on.
- Now it is time to connect your main body to the Y connector. Place your desired size PVC pipe inside the top part of the Y connector. Be sure to make it fit snug. You can primer and glue if you’d like but it is not necessary.
- At the top of your main body you are going to primer and glue the last 3 inch piece. Again be sure to leave 2 inches exposed. This is where you are going to place your second cap with a knob. This is where you are going to pour your feed in. Do not glue the cap on.
Boom son, you have yourself a badass chicken feeder that is super easy to make and doesn’t cost a fortune. Plus, it saves you labor and is super efficient.
Happy feeder making!
I’d love to hear how this turned out. Leave a comment below if you have any additional questions or to share how it came out.